Hv Test Equipment AC Vlf Hipot Tester Portable 60kv Hipot Test Set

• After-sales Service: 1 Year
• Warranty: 1 Year
• Power Supply: AC220V ±15% 50Hz±2Hz
• Model NO.: HDVLF
• Maximum Output Voltage: 30/50/60/80kv
• Output Mode: Single Connection or Tandem-Line
• Vlf Test Frequencies: Selectable 0.1 Hz,0.05Hz,0.02 Hz (Additional Frequ
• Transport Package: Wooden Carton
• Trademark: HD Power
• Origin: Made in China
• HS Code: 850421000

Product Description

General Information

Withstand voltage test is an essential preventive test for electrical equipment.It is divided into two parts:AC and DC withstand voltage test.AC test can be further divided into power frequency,variable frequency and 0.1Hz very low frequency test,among which the last one is highly recommended by IEC,due to its remarkable advantages.

Following is a comparison for DC,Power Frequency,Variable Frequency,and 0.1Hz test.
 

Aspects	DC	Power Frequency	Variable Frequency	0.1Hz
Equivalency	poor	good	good	good
Insulation Damage	strong	slight	slight	slight
Operation Safety	relatively low	relatively low	relatively low	high
Wiring Difficulty	complicated	complicated	most complicated	simple
Volume	smallest	largest	large	small

In fact VLF test is the substitute for power frequency test.It is suitable for testing electrical equipment with large capacitance.

Features

1. Small size and light weight.Big LCD screen and built-in printer.
2. 0.1Hz,0.05Hz and 0.02Hz can be chosen,which ensures a wide test range.
3. It realizes the fully automatic voltage boost,step-down,measurement and protection as well as the manual intervention in the process of automatic voltage boost.
4. Overvoltage protection and over-current protection.Action time is no longer than 20ms.
5. Data of current,voltage,wave form can be directly sampled at high voltage side,so the data is real and accurate.
6. A high voltage output protective resistor is provided in the voltage boost body in the design and this eliminates the need of additional protective resistor connected outside.
7. Closed-loop negative feedback circuit is adopted.No capacity rising during outputing.

Specifications
 

Maximum Output Voltage	30/50/60/80KV
Output Mode	Single Connection Or Tandem-line
Maximum Load Capacity,VLF	30KVl1.1μ[email protected];2.2μ[email protected];5.5μ[email protected] 50KV1.1μ[email protected];2.2μ[email protected];5.5μ[email protected] 60KV 0.5μ[email protected];1μ[email protected];2.5μ[email protected] 80KV 0.5μ[email protected];1μ[email protected];2.5μ[email protected]
VLF Test Frequencies	Selectable 0.1 Hz,0.05Hz,0.02 Hz (Additional Frequencies available upon request)
Accessories(available upon request)	Discharge rod x 1
	Capacitor x 1
	high voltage wire x 1
	Low voltage wire x 1
	Ground Cables x 1
	Interconnect cable x 1